We use flat-top Terex Comedil tower cranes ranging between 350 and 750 mt. The maximum loads of the cranes range from 16 to 40 tonnes. Terex Comedil tower cranes have a good free standing height, and thanks to their flat-top design, several of them can easily be placed at the same construction site. We can directly contact designers at Terex, and in many cases, we can customise the erection methods for cranes according to customers requirements.

Terex tower cranes




Lifting capacity

The lifting capacity of a crane is usually expressed in metric tons. This unit indicates the greatest permitted moment of a crane. For example, a crane of 200 metric tons is capable of lifting a load weighing 10 tonnes to a distance of 20 metres from the boom. A metric ton is not an exact unit, as the calculation of the greatest permitted moment must include the effect of the weight of the jib (which depends on the length of the jib) as well as the weight of the hoisting ropes, trolley and hook. 

Another key figure of lifting capacity is the maximum load, which depends on the dimensioning of the lifting equipment. Usually, the lifting capacity is demonstrated by using a load chart. The chart indicates the largest permitted load at a given distance. It is easy to see from load charts that the lifting capacity is slightly greater when a shorter jib is used than with a long jib.

The height of the crane also affects the lifting capacity. When lifting is performed extremely high up, the weight of the hoisting rope increases significantly and reduces the useful load.

Käytämme evästeitä. Jatkamalla sivustoon hyväksyt evästeiden käytön.